Panasonic DMR-ES30V - Manual (Page 20)

Getting started
20
VQT0N92
Connection (without Audio/Video cable) only
In some cases, interference (lines or patterning) or a very poor
picture may appear on the TV when the DVD Recorder is
connected. If this happens, follow the steps below to change
the video playback channel (RF output channel) to remove the
interference.
[1] Press [FUNCTIONS] for more than 5 seconds.
The RF output channel number is displayed on the unit display.
[2] Press [CH, W, X] to select a channel number
(CH3 or CH4).
≥(For example, if the original channel number was 3, enter 4.)
The unit’s display
Each time you press the button:
CH 3 (Default setting)
(# CH4 (# OFF
^-----------------------------------------------J
≥Set the RF output channel of the DVD Video Recorder to “OFF”
(RF OFF) when the DVD Video Recorder is connected to the
TV via the Audio/Video cable.
[3] Press [ENTER] to finish this setting.
∫ Removing Interference
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
S
SCHEDULE
OPERATION
SELECT
DVD ERASE REC REC MODE ADD/DLT
POWER
TIME SLIP
FUNCTIONS DIRECT NAVIGATOR
TOP MENU VHS MENU
RETURN
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
STATUS DISPLAY
AUDIO
TV
TV/VIDEO
VHS DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
DUBBING
VHS DVD
CREATE
CHAPTER VCR/TV
JET REW
SKIP
SLOW/
SEARCH
PLAY
DVD
DVD/VHS POWER
VCR/TV
1
3, 4, 2, 1
2;, ;1
ENTER
Í
DVD
FUNCTIONS
6, 5 :, 9
∫
;
CH, W, X
FUNCTIONS
VHS MENU
VCR/TV
Numeric
buttons
TV screen
Picture with interference
RF Output Channel
Press the channel up/down buttons
to select a RF Output Channel.
Ch. 3
ENTER
RF Output Channel
Press the channel up/down buttons
to select a RF Output Channel.
Ch. 4
ENTER
<Before Changing> <Before Changing>
The unit’s display The unit’s display
Indication when the RF output
channel is 3 (example) Indication after changing the RF
output channel to 4 (example)
∫ When you set the RF output channel to “CH3” or
“CH4”
A picture is output on CH3 or CH4 from RF output.
Press [VCR/TV] to switch the mode from TV to VCR, and vice
versa.
≥When the TV mode is selected, the “TV” indicator lights on the
unit’s display and you can watch TV.
≥When the “TV” indicator does not light on, then VCR mode is
selected and you can watch images from the unit.
The clear picture
ES30VP&PC.book 20 ページ ２００５年２月２１日 月曜日 午後２時３２分