Panasonic DMR-ES30V - Manual (Page 44)

Convenient functions
44
VQT0N92
≥ Underlined items are the factory default settings.
∫ Video
Still Mode
Select the type of picture shown when you pause play.
(
l 64, “Frame and field”)
[Automatic] [Field] [Frame]
Black Level Control
Select “Normal”, “Lighter” or “Darker” to adjust the black level control
to the desired setting for picture enhancement.
Press [ENTER] to show the following settings.
Input Level
Adjusts the black level of the input signal.
[Lighter] [Darker]
Output Level (Composite/SVideo)
Adjusts the black level of the output signal from the VIDEO OUT
and S-VIDEO OUT terminal.
[Lighter] [Darker]
Output Level (Component)
Adjusts the black level of the output signal from the COMPONENT
VIDEO OUT (Y/P
B /P R ) terminals.
[Lighter] [Normal] [Darker]
∫Audio
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range (
l 64) for easier listening in low volume.
[On] [Off]
Select MTS
Select whether to record the main or secondary audio type (SAP)
when recording or transferring (dubbing) to DVD-R, DVD-RW (DVD-
Video format) or +R. (You cannot select the audio type on the unit
when recording audio to DVD-R, DVD-RW (DVD-Video format) or
+R from an external device. Select it on the external device.)
[Main] [Secondary Audio Program (SAP)]
Digital Audio Output
Change the settings when you have connected equipment through
the unit’s DIGITAL AUDIO OUT terminal (
l 15).
Press [ENTER] to display the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
[On] [Off]
Dolby Digital
Choose whether to output by “Bitstream” which processes Dolby
Digital signals on other connected equipment or to convert the
signals to “PCM (2ch)” on the unit before output.
[Bitstream] [PCM]
DTS
Choose whether to output by “Bitstream” which processes DTS
signals on other connected equipment or to convert the signals to
“PCM (2ch)” on the unit before output.
[Bitstream] [PCM]
° Incorrect settings can cause noise to be output which can be
harmful to your ears and speakers, and audio will not be recorded
properly on media such as mini discs.
Field Select if jittering occurs when “Automatic” is selected.
Frame Select if you cannot see small text or fine patterns
clearly when “Automatic” is selected.
On Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Off Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Bitstream When you have connected the unit to a piece of
equipment having Dolby Digital logo.
PCM When you have connected the unit to a piece of
equipment that doesn’t have Dolby Digital logo
° .
Bitstream When you have connected the unit to a piece of
equipment having DTS logo.
PCM When you have connected the unit to a piece of
equipment that doesn’t have DTS logo
° .
DVD
ES30VP&PC.book 44 ページ ２００５年２月２１日 月曜日 午後２時３２分