Maintenance, Disc handling ≥inserting discs, Getting started – Panasonic DMR-ES30V User Manual

Page 8

Advertising
background image

Getting started

8

VQT0N92

How to hold a disc

Do not touch the recorded surface.

Concerning non-cartridge discs

Be careful about scratches and dirt.

If there is dirt or condensation on the disc

Wipe with a damp cloth and then wipe dry.

Handling precautions

≥Do not attach labels or stickers to discs. (This may cause disc

warping and unbalanced rotation, rendering it unusable.)

≥Write on the label side of the disc only with a soft, oil-based felt

pen. Do not use ballpoint pens or other hard writing implements.

≥Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.
≥Do not drop, stack, or cause impact to discs. Do not place objects

on them.

≥Do not use the following discs:

- Discs with exposed adhesive from removed stickers or labels

(rental discs etc.).

- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart shapes.

≥Do not place in the following areas:

- In direct sunlight.
- In very dusty or humid areas.
- Near a heater.
- Locations susceptible to significant differences in temperature

changes (condensation can occur).

- Where static electricity or electromagnetic waves occur.

≥To protect discs from scratches and dirt, return them to their cases

or cartridges when you are not using them.

[1]

Press [

<, OPEN/CLOSE] on the main unit to

open the tray.

≥You can insert a cartridge or non-cartridge disc.

[2]

Press [

<, OPEN/CLOSE] on the main unit to

close the tray.

≥If you insert a DVD-RAM with the write-protect tab set to

“PROTECT” (

l 30), play starts automatically.

Note
≥A double-sided disc should be loaded with the side you want to

record/play facing down.

≥It is not possible to record continuously from one side of a double-

sided disc to the other. You will need to eject the disc and turn it
over.

≥When using 8 cm (3q) DVD-RAM or 8 cm (3q) DVD-R, remove the

disc from the cartridge.

The precision parts in the unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.

To clean the unit, wipe with a soft, dry cloth.
≥Never use alcohol, thinner or benzine to clean the unit.
≥Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, possibly
making it impossible to record or play discs.
Use the lens cleaner about once every year, depending on
frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.

When the unit is not to be used for a long time

To save power, unplug it from the household AC outlet. The unit consumes a small amount of power even when it is turned off.

Standby power consumption

Quick Start

(

l 43)

1 Sec. Quick Start for Recording on DVD-RAM

°

° From the power off state, recording on DVD-RAM starts about 1 second after first pressing the [Í, DVD/VHS POWER] and then

sequentially pressing the [

¥, REC] (Quick Start Mode).

Disc handling

Inserting discs

Maintenance

Lens cleaner: LF-K123LCA1 or RP-CL720 (On sale from May
2005)

(1)

(2)

(3)

Non-cartridge disc

Cartridge disc

(1) Insert label-up.
(2) Insert fully so it clicks into place.
(3) Insert label-up with the arrow facing in.

Front Display (

l 45)

Automatic

Bright

Quick Start (

l 43)

On

Approx. 9 W

Approx. 10 W

Off

Approx. 2 W

Approx. 4 W

ES30VP&PC.book 8 ページ 2005年2月21日 月曜日 午後2時32分

Advertising