Panasonic DMR-ES30V - Manual (Page 28)

Recording
28
VQT0N92
[RAM] [-R] [-RW‹V›] [+R]
∫ Scheduled recording automatically starts at the set
time.
≥Scheduled recording can be started whether the unit is turned on or
off. When the unit is turned off, the sound and the video cannot be
outputted to the TV.
∫ Scheduled recording for TV programs cannot be
executed on both DVD and VHS at the same time.
Make sure the scheduled recording start times do not overlap on
both DVD (
l 29) and VHS (l 53) Scheduled Recording List
screens.
When the scheduled recording settings overlap:
≥When the start time of both scheduled recordings is the same, the
scheduled recording of DVD has priority.
≥When the same tuner channels are specified in scheduled
recordings on both DVD and VHS, only one scheduled recording
can be started.
≥When the interval between the first scheduled recording and the
second scheduled recording on DVD is 1 minute or less as shown
below, the second scheduled recording on DVD has priority over
the scheduled recording on VHS even if its start time is later than
the scheduled recording on VHS.
When the scheduled recording settings of DVD and VHS are
overlapped, the setting of DVD takes priority.
≥“
” lights on the unit’s display of both sides in the standby mode.
When the recording starts, “ ” on the recording side (DVD side)
remains lit and the “ ” on the other side (VHS side) starts flashing.
You can enter up to 16 programs a month in advance.
Preparation
≥Release protection (disc
l 30, cartridge l 30) [RAM].
≥Insert a disc ( l 8) and confirm there is sufficient empty space for
recording on it ( l 47).
≥Check that the clock is set to the correct time.
≥Press [DVD].
Entering the PlusCode ® numbers is an easy way of scheduled
recording. You can find these codes in TV listings in newspapers and
magazines.
≥When connecting a cable TV box or satellite receiver, the VCR
Plus i system does not work. Program the scheduled recording
manually ( l 29).
[1] Press [VCR Plus _].
[2] Press the numeric buttons to enter the
PlusCode number.
≥Press [2] to move back to correct a digit.
[3] Press [ENTER].
≥Confirm the program and correct it if necessary using [3, 4,
2, 1] (“Manual programming” l 29, step 2).
≥When “XP” is displayed in the unit’s display, the recording
mode automatically changes to “FR” in order to prevent loss of
recording when there is not enough space. Change to “XP”
mode if you want to set scheduled recording using “XP” mode.
≥“Invalid Entry” is displayed when you enter the wrong PlusCode
number. Reenter the PlusCode number.
≥To enter the name of the program
Press [ 2, 1] to select “Title Name” and press [ENTER]
( l 32).
[4] If the program is correct
Press [ENTER].
≥“ ” lights on the unit’s display.
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULED LIST screen ( l 29).
≥Repeat steps 1–4 to program other recordings.
[5] Press [RETURN].
∫To stop recording while a program is working
Press [ ∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the DVD of the main unit for 3
or more seconds to stop recording.
Note
Refer to Note in Manual programming (
l 29).
Preparation
≥Press [DVD].
Cautions for using scheduled recording
on DVD and VHS
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
S
SCHEDULE
OPERATION
SELECT
DVD ERASE REC REC MODE ADD/DLT
POWER
TIME SLIP
FUNCTIONS DIRECT NAVIGATOR
TOP MENU VHS MENU
RETURN
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
STATUS DISPLAY
AUDIO
TV
TV/VIDEO
VHS DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
COPYING
VHS DVD
CREATE
CHAPTER VCR/TV
JET REW SCHEDULE
REC MODE
RETURN
DVD
VCR Plus+ CANCEL
DVD
RETURN
VCR Plus i
SCHEDULE
REC MODE
∫
3, 4, 2, 1
ENTER
Numeric
buttons
1 minute
4 CH
10 CH
2 CH
VHS
DVD
Scheduled Recording
∫ Using VCR Plus_ system
VCR Plus+ Remaining Recording Time 4:00 LP
12:53 PM 7/13 Tue
SCHEDULED
RECORDING Remaining Recording Time 4:00 LP
12:53 PM 7/13 Tue
Mode Off On Channel Date
39 7/20 Tue 11:00 PM 10:00 PM SP
Title Name
P ENTER t t
DVD
ES30VP&PC.book 28 ページ ２００５年２月２１日 月曜日 午後２時３２分