Paxar 611 - Manual (Page 15)

Users Manual - 610/611/612 Printers Loading Supplies
••
11
3. Lift printhead assembly using the printhead tab until the assembly locks into place.
CAUTION
Make sure you use only approved Paxar supplies. See
Appendix A, "Specifications and Accessories" for a list of
Paxar supplies or contact your Paxar Representative for
more information.
4. Place the roll of supply on the supply holder. Make sure the supply unrolls from the
top as shown.
Do not pick up the printer
by the supply holder.
5. Adjust the supply holder guides so the sides barely touch the roll. Make sure the
supply roll turns freely.
Supply Guides