Paxar 611 - Manual (Page 26)

22
••
Loading Supplies Users Manual - 610/611/612 Printers
7. Slide the ribbon onto the back reel as far as it will go with the writing on the end of
the core facing out. The ribbon roll only fits on the reel one way. Carefully unwind a
few inches of ribbon from the bottom of the roll.
8. Carefully feed the ribbon under both ribbon rollers and printhead as shown.
9. Tape the ribbon to the take-up core. Do not tape the ribbon to the take-up reel.
Take-up Reel
Back Reel