Default printer settings, Using the control panel – Paxar 611 User Manual
Page 8
4
••
Getting Started
Users Manual - 610/611/612 Printers
Default Printer Settings
These defaults can be changed using Paxar's PCMate software. Print Speed - 4.0 ips
(inches per second), Ribbon - High Energy, Supply Type - Black Mark, Contrast - 255,
Backfeed - Enabled, Dispense Position - 120 dots, Backfeed Distance - 110 dots.
Using the Control Panel
The control panel helps you check printer status, displays error codes, and allows you to
perform some basic printer functions.
Printer Status Lights
Power:
The printer shows a steady green light when it is on.
Supplies:
The printer shows a blinking amber light when it is out of
labels or ribbon, or when you have a supply jam.
Paused:
The printer shows a steady amber light when paused.
The printer shows a blinking amber light when there is a
data, communication, or data formatting error. See the
status code box for the error code. The printer also
shows a blinking amber light when it's ready to print a
label in the On-Demand mode. See Chapter 3, "Printing"
for more information.