Paxar 611 - Manual (Page 32)

28
••
Printing Users Manual - 610/611/612 Printers
Non-Printing Zone
A non-print zone is required for text (light copy) and bar codes (heavy copy). Thin lines
and most fonts require a 0.25-inch non-print zone at the leading edge of the label. Bar
codes, bold fonts, and Care symbol fonts require a 0.375-inch non-print zone at the
leading edge of the label. Without these non-print zones, the ribbon sticks to the supply
and can cause jams.
0.375 inch non-print zone
Feed
PCMate Software has a built-in non-print zone; however, some third party software
packages may not. You should verify the non-print zone or check defaults.
Regardless of the software package you are using to
create/design formats, do not place logos or bar codes too
close to the edge of your supply.
Preventing Jams
To prevent jams
♦
Design formats using the appropriate non-print zones.
♦
Do not leave the printhead closed (in the locked position) longer than 30 minutes
without printing. Open (unlock) the printhead before a break period, at the end of
each shift, and at the end of each day.