Using the knife, Adjusting the drop tray – Paxar 611 User Manual
Page 35
Advertising
Users Manual - 610/611/612 Printers
Printing
••
31
Using the Knife
The installed knife is two and a half (2-1/2) inches away from
the printhead. Pressing and holding Feed for two seconds
marks the tag under the printhead to be cut when it reaches the
knife. Depending on the length of your supply, you may lose up
to two tags after the last batch.
________
The knife operates when the printer is running. If the Printer is
paused, the knife stops cutting.
Adjusting the Drop Tray
Depending on the model purchased, your printer may have a
drop tray stacker. Adjust the drop tray by removing the plastic
pins and re-inserting them according to the diagram below.
Select the setting based on the length of your label.
Advertising