Philips 502-1040510 - Manual (Page 23)

23 Using more of your HD receiver
EN
G
LI
SH
Setting your preferences
From the Settings menu, use / to
highlight Preferences and press or OK.
The Preferences menu appears.
Use / / / / OK to navigate through
the settings and options, and make changes.
Press or BACK to save your changes
and return to the previous menu.
You use the Preferences menu to change
these settings:
Display
• Banner duration - Use this to set the
length of time (3 to 10 seconds) that the
channel banner remains on-screen when
you change channel. By default, it is set to
5 seconds.
• Timer warning duration - Use this
to set how soon before the start of a
program should the record-timer alert
you. The available options are 30 seconds
before , 1 minute before (default), 2
minutes before or 5 minutes before.
• Front panel brightness - Use this to set the
brightness of the front-panel display. You can
set this to Low, Medium (default) or High.
Language preferences
• Information language - Use this to
set your preferred language for displaying
programme information to English
(default), Gaelic, Welsh or Irish.
• Audio language - Use this to set your
preferred audio language to English
(default), Gaelic, Welsh or Irish.
• Default subtitles mode - Use this to set
how you prefer to display subtitles.
You can set this to Activated, Not
activated , Auto when no correct
audio (default), Auto when audio is
muted or For hearing-impaired.
• Subtitles language - Use this to set your
preferred language for subtitles to English
(default), Gaelic, Welsh or Irish.
Recording
• Record Link - Use this setting to enable
or disable the control, by your HD receiver,
of the start-stop recording function of your
Video or DVD-R recorder (see the note
on page 29).
Analog output
• Video on AUX Scart - Use this to set
the type of analogue video signals that are
output on the AUX SCART connector of
your HD receiver. You can set this to RGB
(default when V-Out is set to AV) or CVBS
(default when V-Out is set to HDMI).
• Audio on AUX Scart - This setting
applies when your HD receiver is
connected via a SCART Cable to a
standard-definition TV. Use this to set the
type of analogue audio signals that are
output on the AUX SCART connector
of your HD receiver. You can set this to
Mono or Stereo (default).
• TV format - Use this to set the format
of the analogue video that is output on
the AUX SCART connector of your HD
receiver. You can set this to 4/3 Letter Box,
4/3 Centre Cut Out or 16/9 (default).
The options determine how widescreen
(16:9) programmes show on a standard-
definition TV with aspect ratio of 4:3.
Digital output
• HDMI output resolution - Use this to
set the HDMI video resolution to 576i,
576p, 720p, 1080i, 1080p, Auto (default)
or Original. Note that you can also
change this setting using the RES button
on the front panel of your HD receiver.