Philips 502-1040510 - Manual (Page 28)

Accessories and connections 28
Recommended connection
• Connect the HDMI output of your HD
receiver to an HDMI source input of your
amplifier.
• Connect the HDMI output of your
amplifier to an HDMI input of your TV.
System settings
• For your HD receiver, set the Audio
capabilities on HDMI setting (under
Menu > Settings > Preferences >
Digital output ) to AUTO.
• Select the correct A/V source on your TV.
• Select the correct A/V source on your
amplifier.
• Volume controls and necessary Lip sync
adjustments are performed by your
amplifier. Refer to your amplifier’s user
manual.
7.2 Connecting your recording
equipment
HD receiver
Aerial wall
socket
1
3 2
4
TV
HDMI
VCR
SCART
Mains wall
socket
Connect the aerial cable (not supplied) from
the aerial wall socket to the Antenna IN
connector on the rear panel of your HD
receiver.
Use the supplied HDMI cable to connect the
HDMI connector on the rear panel of your
HD receiver to the HDMI input connector
of your TV.
7 Accessories and
connections
7.1 Connecting your audio equipment
Audio Equipment
L R Digital
Analogue
A C B
HDMI HDMI
TV
HDMI
C
HD receiver
Option A – Electrical S/PDIF connection
(Digital)
Connect the DIGITAL audio output of your
HD receiver to the relevant audio input of your
audio equipment using an electrical S/PDIF cable
(not supplied).
Refer to the user manual of your audio
equipment to choose the proper digital audio
input.
Note
With a digital connection via the DIGITAL
output of your HD receiver, mute and volume
operations are managed by your audio
equipment and not by your HD receiver.
Option B – Analogue connection
Connect the L/R audio outputs to the relevant
audio inputs of your audio equipment using a
double CINCH cable (not supplied).
Refer to the user manual of your audio
equipment to choose the proper analogue audio
inputs.
Option C - HDMI connection
Recent amplifiers are fitted with one or more
HDMI source input(s) and one HDMI output.