Panasonic KX-TG2563F - Manual (Page 14)

14
Settings
Up to 3.5 hours
Up to 11 days
Recharge
Recharge the battery when:
—“Recharge battery” is displayed on
the handset,
—“ ” flashes on the display, or
—the handset beeps intermittently while it is in use.
•If you DO NOT recharge the handset battery for more than 15 minutes, the
display will keep indicating “Recharge battery” and/or “ ” will continue
to flash.
Battery information
After your Panasonic battery is fully charged (p. 13):
Operation Approx. battery life
While in use
(TALK)
Up to 4.5 hours
While not in use (Standby)
near the base unit*
away from the base unit
Recharge battery
*Within about 10 feet (3 m)
•Battery life may be shortened depending on usage conditions, such as viewing
the Caller ID Caller List or directory list, and ambient temperature.
•Clean the handset and the base unit charge contacts with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
•If the battery is fully charged, you do not have to place the handset on the base
unit until “Recharge battery” is displayed and/or “ ” flashes. This will
maximize the battery life.
•The battery cannot be overcharged.
Standby mode (The handset is off the base unit.)
The handset goes into the standby mode after you finish using the
handset (making/answering a call, viewing the Caller List or directory
items etc.). The display is blank, but the handset can receive calls.
The battery life is conserved in this mode.