Panasonic KX-TG2563F - Manual (Page 48)

48
Voice Mail Service
•If “Voicemail” and “
” still remain on the display and the VOICE MAIL
indicator on the base unit still flashes even if you have listened to your voice mail
message(s), press (FUNCTION/EXIT/CH), and press and hold
(INTERCOM/CLEAR) on the handset until the unit beeps. “Voicemail” and
“
” will disappear and the indicator will go off.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “Voicemail” and “ ” may not be displayed and the
VOICE MAIL indicator may not flash.
•If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
Listening to Voice Mail Messages
After receiving a voice mail message, “Voicemail” and “ ”will be
displayed and the VOICE MAIL indicator on the base unit will flash. You
can listen to your voice mail message(s) using the handset or the base
unit.
With the handset With the base unit
1 Press
(FLASH/CALL!WAIT/VOICE!MAIL) ,
and press (TALK) .
•The unit is connected to the
telephone line and dials the
access number (p. 46).
2 Follow the pre-recorded
instructions.
3 When finished, press (TALK) .
1 Press (VOICE!MAIL) .
•The unit is connected to the
telephone line and automatically
dials the access number (p. 46).
2 Follow the pre-recorded
instructions.
3 When finished, press
(DIGITAL!SP-PHONE) .