Panasonic KX-TG2563F - Manual (Page 46)

46
Voice Mail Service
Voice mail service is an electronic on-line answering system offered by
your telephone company. After subscribing, the voice mail system can
answer calls automatically when your line is busy or if calls are not
answered. Callers can leave messages by following the pre-recorded
instructions. When voice mail messages are recorded, “Voicemail” and
“
” will be displayed and the VOICE MAIL indicator on the base unit will
flash.
To use this feature, you must first store your access number.
Storing a Voice Mail Access Number
Make sure the unit is in the standby mode initially.
1 Press (FUNCTION/EXIT/CH) .
2 Press Ö or Ñ repeatedly until the arrow
points to “Program”, and press FWD/EDIT
á (Yes key).
3 Press Ö or Ñ repeatedly until the arrow
points to “Save mailbox#”, and press
FWD/EDIT á (Yes key).
4 Enter your access number, up to 32 digits.
•You may enter pauses *
.
•If you enter a wrong number, press
(INTERCOM/CLEAR). Digits are erased from
the right. To erase all digits, press and hold
(INTERCOM/CLEAR).
5 Press Ö (Next key).
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 4.
6 Press FWD/EDIT á (Save key).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
H
Program
GF H
=Yes
H
Save mailbox#
Voicemail tone
GF H
=Yes
1234567PPP890
Save mailbox#
1234567PPP890
IH G
=Next
1234567PPP890
F
=Edit
H
=Save
*
For quick access to your voice mail box by using (FLASH/CALL!WAIT/VOICE!MAIL)
or (VOICE!MAIL), you may add pauses between your voice mail box access number
and your mail box password in step 4.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number Your mail box password
Pauses
Pressing (REDIAL/PAUSE) once creates a 3.5 seconds delay and counts as
one digit. The delay time depends on a telephone company.