Panasonic KX-TG2563F - Manual (Page 19)

19
Preparation
Selecting the Ringer Volume
You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring. Your phone comes
from the factory set to HIGH.
Handset ringer volume
Make sure the unit is in the standby mode initially.
1 Press (FUNCTION/EXIT/CH) .
2 Press Ö or Ñ repeatedly until the
arrow points to “Ringer volume”,
and press
FWD/EDIT á (Yes key).
3 Press Ö or Ñ to select the
desired volume.
•The selected volume is displayed and rings.
•To turn the ringer OFF, press and
hold Ö until 2 beeps sound.
To turn the ringer ON, press Ñ or Ö
in step 3.
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a
call is being received. Press Ö or Ñ while the unit is ringing.
•When set to OFF, “Ringer off” will flash for about 45 seconds before the
handset returns to the standby mode.
•When you replace the battery, the selected ringer volume setting will return to the
factory set (HIGH). Reprogram if necessary.
Base unit ringer volume
Make sure the unit is in the standby mode
initially. (You can also select the ringer
volume while a call is being received.)
•To select HIGH or LOW, press
(HOLD/RINGER) . Each time you press the
button, the ringer volume will change and
the selected volume will ring.
•To turn the ringer OFF, press and hold
(HOLD/RINGER) until 2 beeps sound.
•To turn the ringer ON,
press (HOLD/RINGER) .
The ringer will sound at the HIGH level.
Save directory
H
Ringer volume
GF H
=Yes
Ringer
Low
❚ ❚ ❚ ❚ ❚ ❚
High
GF
Ringer
Low
❚ ❚ ❚ ❚ ❚ ❚ High
GF
HIGH
LOW
Ringer off
OFF
Ц С
Ц С
(HOLD/RINGER)