Panasonic KX-TG2563F - Manual (Page 17)

Programmable Functions
17
Preparation
H
Save DIRECT#
Set flash time
Save mailbox#
Voicemail tone
Set line mode
Set dial mode
Talk switching
You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode initially.
During programming:
*To select a desired function item, press
Ö or Ñ repeatedly until the
arrow points to the item. Then press FWD/EDIT á to go to the next step.
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base. Place on cradle and try again. ” is displayed.
Press (FUNCTION/EXIT/CH) .
<Function menu>*
To store an item in the directory (p. 39).
To select the ringer volume (p. 19).
Press FWD/EDIT á .
To store a phone number in the DIRECT button
(p. 34).
To select the flash time (p. 53).
To store a voice mail access number (p. 46).
To set the voice mail tone (p. 47).
To select the line mode (p. 16).
To select the dial mode (p. 15).
To set the auto talk feature (p. 18).
H
Save directory
Ringer volume
Program
<Function menu>*