Precor 100i - Manual (Page 77)

100i Commercial AMT Assembly Guide 7
Replace the back console plate onto the display console using the four
screws removed in step 4. Secure the fasteners with a Phillips-head
screwdriver. Verify that the heart rate display is operational.
1. Stand on the rear pedestal and face the display.
2. Place one foot in the lower foot plate and grasp an arm or a
stationary handlebar for stability while you step into the other foot
plate.
3. When you are comfortably situated, begin climbing.
4. Grasp both touch-sensitive handlebar grips.
5. Look at the HEART RATE display. After a few seconds, a number
appears indicating your heart rate.
Note: If a number does not appear in the HEART RATE display, check
the 4-prong heart rate cable to make sure it is properly connected.