Panasonic KX-F780 - Manual (Page 18)

18
1 Open the document feeder tray.
2 Insert the documents FACE DOWN until a beep
tone is heard.
¡ The unit can accept up to 15 sheets of paper at a
time.
3 Adjust the document guides to the width of the
document.
4 Press (RESOLUTION) repeatedly to the desired
setting.
For printed or
typewritten originals
with normal-sized
characters.
For originals with small
printing.
For originals with
minute printing.
For originals containing
photographs, shaded
drawings, etc.
Transmitting documents
Documents you can send
Note:
¡ Remove clips, staples or other similar fastening objects.
¡ Check that ink, paste or correction fluid has dried.
¡ Do not send the following types of documents. Use copies for fax transmission.
— Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Heavily curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)
Loading documents
128 mm
(5 w )
128 mm
(5
w
)
600 mm
(23
5
⁄ 8
w
)
216 mm
(8 1 ⁄
2
w )
Paper width
216 mm (8 1 ⁄
2
w )
208 mm (8 3 ⁄
16
w )
Scanned
area
4 mm
Minimum size Maximum size Effective scanning area Document weight
Single sheet:
45 to 90 g /m 2 (12 to 24 lb.)
Multiple sheets:
60 to 75 g /m 2 (16 to 20 lb.)
Note:
¡ Using the fine, super fine or half tone setting
will increase transmission time.
¡ If the resolution setting is changed during
feeding, it will be effective from the next
sheet.
¡ The super fine resolution only works with
other compatible machines.
Document
guides
FACE DOWN
(RESOLUTION)
Document feeder tray
STANDARD
FINE
SUPER FINE
HALF TONE