Panasonic KX-F780 - Manual (Page 48)

2 3
4 5 6
7 8 9
0
1
48
1 Press (MENU) .
2 For common message transfer,
press
K , then F @ .
For mailbox 1 message transfer,
press
K , then F A .
For mailbox 2 message transfer,
press
K , then F B .
For mailbox 3 message transfer,
press
K , then F C .
3 Press (START/COPY/SET) .
4 Press (‹) or (›) to select the desired setting.
MESSAGE: transfers incoming messages.
PAGER:
calls your pager.
OFF: turns off this feature.
5 Press (START/COPY/SET) .
6 a: If you selected “MESSAGE” in step 4:
Enter the number where the message is to be
transferred.
b: If you selected “PAGER” in step 4:
Enter your pager phone number.
If necessary, press (REDIAL/PAUSE) twice.
Contact your pager company regarding the
proper pause time.
b: If your pager has the ability to display phone
numbers, enter the number that you wish to
appear on the display.
Press
K if required by your pager company.
b: ¡ You may enter a total of 46 digits and/or
pauses.
7 Press (START/COPY/SET) .
8 Press (MENU) .
NO.=
MODE=OFF [ ÿŸ ]
BOX3 MSG TRNSF
BOX2 MSG TRNSF
BOX1 MSG TRNSF
COMMON MSG TRNSF
SYSTEM SET UP
Note:
¡ This feature can be turned on/off remotely from a touch tone phone (see page 53).
(MENU)
(START/COPY/SET)
Dial keypad
(‹) (›)
(REDIAL/PAUSE)
Setting the message transfer/pager call