Panasonic KX-F780 - Manual (Page 40)

Receiving using an extension
40
2 3
4 5 6
7 8 9
0
1
1 Press (MENU) .
2 Press K , then D A .
3 Press (START/COPY/SET) .
4 Press (‹) or (›) to select the desired setting.
¡ If this feature is not required, select “OFF”.
5 Press (START/COPY/SET) .
6 Enter the new code number.
7 Press (START/COPY/SET) .
8 Press (MENU) .
CODE= UU
MODE=ON [ ÿŸ ]
REMOTE FAX ACT.
SYSTEM SET UP
Remote fax receiving
(using an extension to receive a fax message)
If you have an extension phone on the same line, it is possible to receive a fax message. Using the extension
phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing
(START/COPY/SET) .
Important:
¡ To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
¡ The remote fax activation code is set to “ UU ” as a pre-selected setting.
1 When a call is received, lift the handset of the
extension phone.
2 When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
3 Hang up the handset.
¡ The facsimile unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character * .
Note:
¡ Some special telephone company services
will require you to press a service access
code. If you subscribe to such services,
whole or part of the remote fax activation
code must be different from the service
access code.
¡ If the remote fax activation code is set to
“0000”, the unit does not work properly.
(MENU) Dial keypad
(START/COPY/SET)
To the same line
Extension phone
(‹) (›)