Sending faxes – Panasonic KX-FPG372 User Manual

Page 61

Advertising
background image

Sending Faxes

61

Sending the same document
to pre-programmed parties

1

Insert the document FACE DOWN.

L

If necessary, press {

{

{

{+

+

+

+}

}

}

}

or {

{

{

{-

-

-

-}

}

}

}

repeatedly to select the desired
resolution (page 55).

2

Press {

{

{

{>

>

>

>}

}

}

}

.

DIRECTORY

[+ -]

<MAILBOX>)

3

Press {

{

{

{-

-

-

-}

}

}

}

or {

{

{

{+

+

+

+}

}

}

}

until the following is

displayed.

<BROADCAST>
SEND:PRESS SET

4

Press {

{

{

{

SET}

}

}

}

.

L

The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.

L

After transmission, the stored document
will be erased automatically, and the
unit will automatically print a broadcast
sending report.

Note:

L

If you select “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.

L

If the document exceeds the memory
capacity, sending will be canceled.

L

If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialed up to 2 times after all of the
other entries have been called.

To send the same document to more than
one party only once

You can also select the parties for each
transmission.

1. Insert the document.

2. Press {

{

{

{>

>

>

>}

}

}

}

.

3. Press {

{

{

{-

-

-

-}

}

}

}

or {

{

{

{+

+

+

+}

}

}

}

until the following is

displayed.

<ONE TIME BROAD>

PRESS SET

4. Press {

{

{

{

SET}

}

}

}

to start programming the entries

you want to transmit to.

DIR=

[00]

NAVI.[+ -] & SET

5. Press {

{

{

{+

+

+

+}

}

}

}

or {

{

{

{-

-

-

-}

}

}

}

until the desired entry you

want to transmit to is displayed.

Example:

BILL
6543210

6. Press {

{

{

{

SET}

}

}

}

.

Example:

DIR=BILL

[01]

SEND:PRESS SET

L

To program other entries, repeat steps 5
and 6 (up to 20 entries).

7. Press {

{

{

{

SET}

}

}

}

to start transmission to the

programmed entries.

To cancel the broadcast setting

1. Press {

{

{

{

STOP}

}

}

}

while the unit displays the

following.

BROADCASTING

L

The display will show the following.

SEND CANCELED?
YES:SET/NO:STOP

2. Press {

{

{

{

SET}

}

}

}

.

FACE DOWN

{

STOP}

{

SET}

{>}{+}{-}

Advertising