Features summary – Panasonic KX-FPG372 User Manual

Page 90

Advertising
background image

Features Summary

90

Code #36: Receiving oversized documents

RCV REDUCTION
MODE=92%

[

±]

If the size of the document sent by the other
party is as large as, or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.

Code #39: Changing the display contrast

LCD CONTRAST
MODE=NORMAL

[

±]

NORMAL (default): For normal contrast.

DARKER: Used when the display contrast is too
light.

Code #41: Changing the fax activation code

FAX ACTIVATION
MODE=ON

[

±]

If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {+} or {-} to select “ON”.

4. Press {SET}.

5. Enter your code from 2 to 4 digits, using 0– 9,

# and *.

L

The default code is “

@

#9”.

L

Do not enter “0000”.

6. Press {SET}.

7. Press {MENU}.

Code #42: Setting the message alert

MESSAGE ALERT
MODE=OFF

[

±]

To alert you with beeps when a new voice
message is recorded. If you hear slow beeps,
listen to recorded messages. The beeps will
stop.

ON: You will hear a beeping sound.

OFF (default): Deactivates this feature.

Code #43: Setting the recording time alert

REC. TIME ALERT
MODE=OFF

[

±]

To alert you with beeps when there is less than
60 seconds of remaining recording time. If you
hear slow beeps, erase the recorded messages
(page 75, 80). The beeps will stop.

ON: You will hear a beeping sound.

OFF (default): Deactivates this feature.

Code #44: Setting the memory reception alert

RECEIVE ALERT
MODE=ON

[

±]

To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
If you are alerted by a slow beeping sound, clear
the printing problem and make sure the unit is
supplied with enough paper to print the stored
document. The beeps will stop.

ON (default): You will hear a beeping sound.

OFF: Deactivates this feature.

Code #46: Setting the friendly reception

FRIENDLY RCV
MODE=ON

[

±]

To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).

ON (default): You do not have to press
{

FAX/START} for fax reception.

OFF: You have to press {FAX/START} for fax
reception.

Setting

Recording
paper size

Original
document
size

100%

Legal

Letter, A4

A4

Letter

92%
(default)

Letter

Letter

Legal

Legal

A4

A4

86%

Letter

A4

72%

Letter

Legal

A4

Legal

See page 87 for the programming method.

Advertising