Panasonic KX-FPG372 - Manual (Page 91)

Features Summary
91
Code #47: Setting the fax voice guidance
FAX GUIDANCE
MODE=ON
[
±]
If you wish to hear voice guidance, activate this
feature.
ON (default): You will hear voice guidance.
OFF: Deactivates this feature.
ERROR: To hear the voice guidance only when
fax transmission/reception fails.
Code #51: Setting the mailbox 1 password
BOX1 PASSWORD
ID=
If you wish to prevent other users from retrieving
messages, program a password for mailbox 1.
1. Press {MENU}.
2. Press {#}, then {5}{1}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is “555”.
4. Press {SET}.
5. Press {MENU}.
Code #52: Setting the mailbox 2 password
BOX2 PASSWORD
ID=
If you wish to prevent other users from retrieving
messages, program a password for mailbox 2.
1. Press {MENU}.
2. Press {#}, then {5}{2}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is “555”.
4. Press {SET}.
5. Press {MENU}.
Code #54: Changing the recording time for
your own TAD/FAX greeting message
GREETING TIME
MODE=16s
[
±]
16s (default): Up to 16 seconds.
60s: Up to 60 seconds.
See page 71 for details.
Code #55: Greeting message for mailbox 1
BOX1 GREETING
CHECK
[
±]
See page 80 for details.
Code #56: Greeting message for mailbox 2
BOX2 GREETING
CHECK
[
±]
See page 80 for details.
Code #60: Setting the message transfer
MESSAGE TRANSFER
MODE=OFF
[
±]
To transfer a recorded incoming message to
another telephone (page 84), activate this
feature and program the transfer telephone
number.
1. Press {MENU}.
2. Press {#}, then {6}{0}.
3. Press {+} or {-} to select “ON”.
4. Press {SET}.
5. Enter the transfer telephone number.
6. Press {SET}.
7. Press {MENU}.
Code #61: Checking, recording or erasing the
transfer greeting message
TRNS-GREETING
CHECK
[
±]
See page 84, 85 for details.
Code #67: Setting the incoming message
monitor
ICM MONITOR
MODE=ON
[
±]
To hear an incoming message (ICM) from the
speaker when the answering device is recording
the message.
ON (default): You can monitor the incoming
message.
OFF: Deactivates this feature.
Code #70: Calling your pager
PAGER CALL
MODE=OFF
[
±]
See page 85 for details.
See page 87 for the programming method.