Connecting and setting up, Discs (continued), Connecting a monitor television – Panasonic LQ-MD800P User Manual
Page 12
VIDEO
VIDEO
S-VIDEO
S-VIDEO
1
2
Y
CH1(A)
DV IN
RS-232C
USB
~ AC IN
PAUSE
REMOTE
CH2(B)
CH1
CH2
PB
PR
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
AUDIO
MON
VIDEO
VIDEO
S-VIDEO
S-VIDEO
1
2
Y
CH1(A)
DV IN
RS-232C
USB
~ AC IN
PAUSE
REMOTE
CH2(B)
CH1
CH2
PB
PR
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
AUDIO
MON
Component video terminals
Component video (BNC x 3)
Stereo Audio cable (PHONO x 2)
AC mains lead (supplied)
VIDEO
VIDEO
S-VIDEO
S-VIDEO
1
2
Y
CH1(A)
DV IN
RS-232C
USB
~ AC IN
PAUSE
REMOTE
CH2(B)
CH1
CH2
PB
PR
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
AUDIO
MON
COMPONENT
VIDEO IN
Y
P
B
P
R
To set to progressive output mode
(1) While stopped, press [MENU (SHIFT + SEARCH) ]
to show the MENU window.
(2) Use [
,
,
,
] to select the “SETUP” and
press [ENTER].
(3) Use [
,
] to select the “Connection” and press
[
] or [
].
(4) Use [
,
] to select “TV System” and press
[ENTER].
(5) Use [
,
] to select “NTSC” and press [ENTER].
(6) Use [
,
] to select “Progressive (NTSC)” and
press [ENTER].
(7) Use [
,
] to select “On” and press [ENTER].
To return to the previous screen
Press [RETURN].
S-Video, stereo audio terminals
S-Video cable (4P)
Stereo Audio cable (PHONO x 2)
AC mains lead (supplied)
– 12 –
Discs (continued)
TV system
on discs.
NTSC
PAL
NTSC
PAL
NTSC
PAL
Type of monitor television
Multi system monitor
television
NTSC monitor television
PAL monitor television
Yes/No
Yes
Yes
Yes
No
Yes*
1
(PAL60)
Yes*
2
Put the unit on a stable, horizontal surface where it will not be exposed to excessive dust. Do not block its vents or place where it can
become hot.
First of all, please disconnect AC mains leads of all units, which you are going to connect with before connecting and disconnecting cables.
Reconnect the AC mains leads when all connections are complete. Read the instructions for the other units carefully.
Audio/video input will not be output if this unit is switched off or malfunctions. Consider other connections in the system when outputting
audio/video for the purpose of monitoring input. To record essential material, use multiple units to record at the same time, or make other
similar allowances in your system setup.
Connecting and Setting up
You may be unable to use same functions or they may
function incorrectly if the TV system for the unit is
different to that for the disc.
*
1
If your monitor television is not equipped to handle PAL 525/60
signals the picture will not be shown correctly.
*
2
If you set the TV system of this unit to “PAL”, the picture may be
clearer.
Types of disc for the type of connected
monitor television
Composite video, monaural audio terminals
Video cable (BNC)
Audio cable (PHONO)
AC mains lead (supplied)
Connecting a Monitor television
VIDEO
OUT
VIDEO
IN
AUDIO
IN
AUDIO
IN
AUDIO
IN
AUDIO
OUT
AUDIO
MONO
OUT
S-VIDEO
OUT
S-VIDEO
IN
AUDIO
OUT
When you use the discs recorded either PAL or NTSC, refer to this
table. If you select the same TV system (PAL or NTSC) setting for
this unit and your monitor television as the disc you want to play,
the picture can be clearer.