Panasonic LQ-MD800P - Manual (Page 21)

Repeat Play
You can play a program, play list, chapter, title, group or track
repeatedly.
During play, use [ , ]
The display changes as illustrated.
While playing a play list, use [ , ]
Notes
• Repeat play may not work as desired with some discs.
• Repeat play does not work if the disc’s elapsed play time is not
shown on the unit’s display.
• To change from instant repeat play to repeat play, stop instant
repeat play before using repeat play.
• You cannot use repeat play in a row for two or more play lists.
Marker
You can mark points on a disc to return to later (see page 18).
RAM
PL (PLAY LIST) OFF
RAM
Chapter Title OFF
DVD
PRG (PROGRAM) All OFF
DVD-R RAM
– 21 –
Using the FUNCTION menus (continued)
MODE
Normal: Default setting
Soft: Soft picture with fewer video artifact
Fine: Details are Fine mode
Cinema: Enhances detail in dark scenes.
User: You can make further adjustments next parameter.
Page 1/2 of “Detail picture adjustment ”
“User ” → [ ] → [ ] → [ENTER]
Contrast: Increases the contrast between light and dark parts of
the picture (-7 to +7).
Brightness: Brightens the picture (0 to +15).
Sharpness: Adjust the sharpness of the edges of the horizontal
line (-6 to +6).
Color: Adjust the shade of the picture’s color (-7 to +7).
Page 2/2 of “Detail picture adjustment ”
“User ” → [ ] → [ ] → [ENTER] → [ ]
Gamma: Increases the brightness of the center ranges to
improve detail and contrast in dark scenes (0 to +5).
3D NR: Reduces overall noise (0 to +4).
Block NR: Smoother block noise (0 to +3).
Mosquito NR: Reduces the smudging that appears around
contrasting sections of the picture (0 to +3).
• Press [ENTER] or [RETURN] to enter the setting.
• To initialize “Detail picture adjustment”, open the “Detail picture
adjustment” screen and press [SHIFT + RETURN].
DNR
When any item other than “User” is select, you can turn the
recommended setting for 3D NR, block NR, and mosquito NR
on and off.
Progressive
This menu is displayed only when setting both
• Progressive (NTSC)” to “ON” and “TV System” to “NTSC” in
“Connection” Menu.
ON: Enables progressive output
OFF: Disables progressive output
Transfer (When progressive output is ON)
Select the method of conversion for progressive output to suit
the type of material being played.
Auto1: For film material
Auto2: For video material (the same as Auto1, but able to
convert 30 frames per second progressive video)
Video: For video material
ON OFF
Sound menu
Monitor
This is used to select the audio signal to the AUDIO MON
connector
MIX CH1 CH2
Play menu Picture menu