Panasonic LQ-MD800P - Manual (Page 25)

– 25 –
Using the SEARCH PROGRAM
The following functions can be used for a disc you have recorded
on. About the program list
(2) Use [ , ] to select the program you want to
watch and press [ENTER].
For example,
when you
select program
number 2.
• Play of the images that were playing in the background
continues.
To clear the program list
Press [SEARCH] or [RETURN].
For your reference:
• Titles are only displayed if you have given the program a title.
• The unit’s clock must be set correctly.
Program number, Input signal name, recording date,
time recording started, program title (if entered)
• Program 1 is selected in the example.
Write-protected:
• Displayed when you have protected the program.
Program 1 has been protected in the example.
Copy-protected/Different TV system (PAL or NTSC):
• Displayed when you have recorded a program that has
copy protection.
• Displayed when the program failed to record so that the
TV system of the program is different from the setting in
SETUP.
NTSC / PAL:
• Displayed when you recorded using a different encoding
system from that of the TV system currently selected on
the unit.
Unable to play:
• Displayed if you cannot play the program.
Currently recording:
• Displayed when the program is being recorded.
Scroll bar
• If there are more than 5 programs, you can move down
the list by using [ , ] and this bar shows your
approximate position in the list.
Total number of programs
• Shows the total number of programs.
Sub menu
• Displayed when you use [ ].
• Erase a program (Erase).
• Enter or edit a title (Enter Title).
• Check program’s contents (Properties).
• Write-protect a program (Protection).
• Erase part of a program (Partial Erase).
• Divide a selected program into two (Divide).
For your reference:
• The list can show up to 99 programs that you have recorded.
• When using DVD-R, “Partial Erase” and “Divide” are not
displayed in the submenu.
• The contents of the list are recorded on the disc.
• When the disc is protected, you can only access “Properties”.
Release the protection to access other items.
RAM
A list of programs is created as you record them. You can use this
list to find the programs you want to watch.
(1) While played, stopped, or paused, press
[SEARCH].
DVD-R RAM
Selecting programs to play