Panasonic LQ-MD800P - Manual (Page 20)

(2) Use [ , ] to select the menu and press [ ].
(3) Use [ , ] to select the item and press [ ].
(4) Use [ , ] to select the setting.
• Some options require different operations. Follow the on-
screen instructions and the instructions described later.
To return to the previous screen
Press [RETURN].
When you are finished
Press [FUNCTION (SHIFT + STATUS)].
For your reference:
• The screens depend on the disc contents and the FUNCTION
menu is not displayed when a disc is not inserted in the unit.
• Depending on the condition of the unit (playing, stopped, etc.)
and the type of software you are playing, there are some items
that you cannot select or change.
– 20 –
Using the FUNCTION menus
FUNCTION menus contain information about the disc or unit. These
menus allow you to perform operations by changing this
information.
Soundtrack
Soundtrack language
Change the number to select a soundtrack.
Audio attribute
LPCM/PPCM/ Digital : Signal type
k (kHz) : Sampling frequency
b (bit) : Number of bits
ch (channel) : Number of channels
Subtitle
Subtitle language
Change the number to select a subtitle language.
Subtitles on/off
Turn the subtitles ON or OFF.
Audio channel
Change the output audio channel.
While playing a DVD-RAM.
The selected setting is reflected in the status display.
e.g., : “CH1 CH2” is selected
Angle
Change the number to select an angle.
For your reference:
• You cannot change the audio, subtitles, or angles on DVD-Video
created on this unit.
DVD
CH1 CH2 CH1 CH2
RAM
DVD
DVD
Menu Item Setting
(1) During play, press [FUNCTION (SHIFT +
STATUS)].
Common procedures
Disc menu
(No display)