Panasonic LQ-MD800P - Manual (Page 32)

– 32 –
Entering titles
To correct a character
(1) Use [ , , , ] to select the character you want to
correct in the title field.
(2) Press [ ]. (You can also erase characters by using [ ,
, , ] to select “ERASE” and pressing [ENTER].)
(3) Use [ , , , ] to select the correct character and
press [ENTER].
Notes:
• You cannot enter titles if the program is protected. Release the
protection with the search program.
• You cannot enter titles unless the “Disc Protection” in DISC
INFORMATION is “Off”.
• You cannot enter titles if the disc is protected with the write
protect tab.
• If you enter a long title, only part of it is shown in the program list
and play list screen.
This window shows the text you have entered (Title
field)
ERASE [ ]
SET [ ] (when you have finished entering text)
SPACE
To finish entering the title
Press [
].
(You can also finish entering the title by using [ , , , ]
to select “SET” and pressing [ENTER].)
You can:
• Title discs with the DISC INFORMATION in the MENU window.
• Title programs with the SEARCH.
• Title play lists with the PLAY LIST screen.
DVD-R RAM
(1) Insert a disc with something recorded on it and
select the “DISC INFORMATION”, “SERCH
PROGRAM”, or “PLAY LIST” screen.
(2) After the titling screen appears, use [ , , ,
] to select the character you want to enter and
press [ENTER].
• You can enter the following characters.
Entering titles
To enter characters
Use [ , , , ] to select the character you want to enter
and press [ENTER].
To erase characters
Press [
].
(You can also erase characters by using [ , , , ] to
select “ERASE” and pressing [ENTER].)
To enter other characters
Repeat steps (1) and (2).
(3) Press [
]. (You can also finish entering the title
by using [ , , , ] to select “SET” and
pressing [ENTER].)
• The title is entered and the screen disappears.
To stop partway through
Press [RETURN].
(does not save any title information.)