Panasonic KX TG2382PW - Manual (Page 19)

19
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer Volume
You can program the handset ringer volume to HIGH, MEDIUM, LOW or
OFF. If set to OFF, the handset will not ring for external calls, and for
internal calls it will ring at the LOW level. Your phone comes from the
factory set to HIGH.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1 Press (MUTE/FUNCTION) .
2 Scroll to “Ringer setting” by
pressing
Ö or Ñ , and press á .
3 Press
á
at “Ringer volume”.
4 Select the desired volume by
pressing
Ö or Ñ .
•Each time you press Ö or Ñ, the
volume will change and ring.
•To turn the ringer OFF:
press
Ö repeatedly until “Off ?” is
displayed.
5 Press á (Save key).
•A beep sounds.
To turn the ringer ON:
Press
Ñ in step 4.
•The ringer will sound at the LOW level.
•You can exit the programming mode any time by pressing (OFF).
•If set to OFF, “Ringer off” will be displayed while the handset is not in use.
•If you have received new calls, “Ringer off” will not be displayed but
“Received calls” will be displayed while the handset is not in use.
“Ringer off” will be displayed for about 5 seconds after completing operations
or lifting the handset from the base unit or the charger.
•You can also select the ringer volume while an external call is being received.
Press
Ö or Ñ while the handset is just ringing.
•You can change the ringer tone for external calls. See page 48.
HIGH
MEDIUM
OFF
Ringer volume
Off ?
LOW
С
С
С
Ц
Ц
Ц
Message play
H
Ringer setting
Date and time
--------------
H
Ringer volume
Ringer tone
Ringer volume
Low
High
GF H
=Save
Ringer volume
Low High
Ringer volume
Low High