Panasonic KX TG2382PW - Manual (Page 48)

Incoming Call Tone
During an intercom call (p. 42), or while listening to messages on the
handset (p. 52), you can be informed by two tones if a call arrives. If you
set to ON, this incoming call tone will be heard for as long as the line rings.
To delete the incoming call tone, set to OFF. To set the incoming call tone
to sound twice, set to “2”. Your phone comes from the factory set to “2”.
Make sure the unit is not being used and the handset is lifted off the base unit.
1 Press
(MUTE/FUNCTION)
and scroll to
“Ringer setting” by pressing Ö or Ñ ,
and press á .
2 Scroll to “Incoming call” by pressing
Ö
or
Ñ
, and press
á
.
•The current setting will be displayed.
3 Select “On”, “Off” or “2” by pressing
Ö
or
Ñ
.
4 Press á (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
Ringer Tone
You can select the handset ringer tone out of 6 patterns for external calls.
When an external call is being received, the handset will ring in the
selected tone. Your phone comes from the factory set to “1”.
Make sure the unit is not being used and the handset is lifted off the base unit.
1 Press (MUTE/FUNCTION).
2 Scroll to “Ringer setting” by pressing
Ö or Ñ , and press á .
3 Scroll to “Ringer tone” by pressing Ö or
Ñ , and press á .
•The current setting will be displayed.
4 Select the desired ringer tone by pressing
Ö or Ñ .
•Each time you press Ö or Ñ, the tone will
change and ring. If the ringer volume has been
set to OFF, the handset will not ring (p. 19).
•You can also select the ringer tone by pressing dialing buttons (1) to (6).
5 Press á (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
48
Incoming call
tone :2
GF H
=Save
Message play
H
Ringer setting
Date and time
Ringer tone
H
Incoming call
--------------
Ringer tone
:1
GF H
=Save
Ringer volume
H
Ringer tone
Incoming call
Special Features
Message play
H
Ringer setting
Date and time