Panasonic KX TG2382PW - Manual (Page 62)

62
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you need to register the
handset to a different base unit of the same model, it may be necessary to
cancel the registration.
Only one handset can be canceled at a time near the base unit to which the
handset is currently registered.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1 Press (MUTE/FUNCTION) .
2 Scroll to “Initial set” by pressing
Ö
or
Ñ
, and press
á
.
3 Scroll to “HS register” by pressing
Ö
or
Ñ
, and press
á
.
4 Scroll to “Deregistration” by pressing
Ö or Ñ .
5 Press á.
6 Press
(3)(3)(5)
(DEL.) to delete the
registration memory.
•If you make a mistake, press
(HOLD/INTERCOM/CLEAR), and enter “335”.
7 Press á (Ok key).
•A beep sounds and the registration memory will
be erased on both the handset and the base
unit.
•If 3 beeps sound, you entered a wrong code.
Enter “335”, then press á (Ok key).
•To register the handset to another base unit of
the same model, start from step 5 on page 63.
•You can exit the programming mode any time by pressing (OFF) .
•After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on page 63.
Date and time
H
Initial set
--------------
Set answering
H
HS register
--------------
Registration
H
Deregistration
--------------
To deregister
press 3,3,5
:---
H
=Ok
To deregister
press 3,3,5
:335
H
=Ok
Handset [1]
Deregistered