Pioneer VSX-D2011-G - Manual (Page 55)

Basic Operation
BASIC
55
En
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE EON MODE CHARACTER/ SEARCH HI-BIT HI-SAMPLING
SETUP MIC
DIGITAL IN S-VIDEO VIDEO VIDEO INPUT AUDIO L R
SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
CLASS BAND
STATION TUNING
MULTI JOG/ENTER
MULTI JOG CONTROL
SELECT
TUNER EDIT
DUAL MONO setting and playback
The dual mono setting can only be used when listening to Dolby Digital or homemade discs that have dual mono
software encoded in them. Dual mono software usually is used to put two different mono soundtracks, that you
have the capability of listening to at the same time, on one DVD. With this setting you can choose which dual
mono setting you want to listen to. Remember this setting is only applicable if you are using Dolby Digital
software with dual mono and want to isolate one of the channels therein.
1 Press the RETURN button for more
than three seconds to put the
receiver in DUAL MONO mode.
Hold down the RETURN button to cycle through the
different DUAL MONO settings. When you find the
one you want release the button. The L (ch1) and R
(ch2) indicators in the display light to indicate the
playback channel.
DUAL : ch2 DUAL : ch1
DUAL: ch1/ch2
The different settings are: DUAL ch1, where you only
hear channel 1; DUAL ch2, where you only hear channel
2; and DUAL ch1/ch2, where you hear both channels,
but independently from different speakers.
• The default setting is DUAL ch1.
• You can only use this function with Dolby Digital
sources that have this function
memo
1
Using Headphones
1 Plug headphones into the PHONES
jack on the front of the receiver.
No sound will be audible from the speakers when
headphones are plugged in except in MULTI CH IN
mode or when using the pre-outs. In MULTI CH IN
mode the subwoofer will be audible even if the
headphones are plugged in.
• All SURROUND modes will be downmixed to 2
channels.
• If you’re listening to a 2 channel source there will
be no matrix decoding (i.e. you will not be able to
get surround sound decoding).
• For MULTI CH IN mode, only the signal input from
the MULTI CH IN FRONT L and R channels can
be heard.
memo
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE EON MODE CHARACTER/ SEARCH HI-BIT HI-SAMPLING
SETUP MIC
DIGITAL IN S-VIDEO VIDEO VIDEO INPUT AUDIO L R
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
CLASS BAND
STATION TUNING
MULTI JOG/ENTER
MULTI JOG CONTROL
SELECT
TUNER
EDIT
1
PHONES jack