Pioneer VSX-D2011-G - Manual (Page 56)

Basic Operation
56
En
Video Select
This function allows you to listen to one sound source while you watch a different video source on your TV. The
sound source is set in the normal fashion as explained on page 44 You then change the video input with the
VIDEO SEL button.
1 Press RECEIVER.
2 Press the VIDEO SEL button on the
remote control to cycle through the
different possible video inputs.
The first press shows the video input you are currently
using. After that pressing VIDEO SELECT cycles though
the possibilities in the following order:
The OFF setting means you are listening without a
video signal. (Also, when you select CD, CD-R/TAPE1,
MD/TAPE2, TUNER, PHONO, USB or functions the
VIDEO SELECT will be set to off.)
After choosing a video input the display on the receiver
will show that input for about 5 seconds and then
revert to showing the listening mode the receiver is in.
• The VIDEO SELECT remains set to the input you
chose until you change the audio input.
• If you change audio functions the receiver will
reset itself to make the video and audio inputs
correspond.
Also, if you switch the power of the receiver off
when you turn it back on the video and audio in-
puts will reset so that they correspond.
memo
DVD/LD TV/SAT
OFF
VIDEO
VCR2 VCR1/DVR
OFF
S0URCE TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD TV/SAT TV CONT VCR1/ DVR
VCR2 VIDEO CD MULTI OPERATION
DIMMER
MD/ TAPE2 CD-R/ TAPE1 TUNER RECEIVER
1 2
LOUDNESS TONE
3 4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+ 10 DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
¶
TUNING –
STATION –
CHANNEL –
1
4
TEXT ON RF ATT DISP MODE
TUNING +
+
CHANNEL +
¡
STATION
¢
8
3
7
SUB TITLE
BAND
TEXT OFF CLASS
SETUP
2
1
Adjusting the Brightness of the Display (DIMMER)
Use the display DIMMER button to adjust the brightness of the fluorescent display.
1 Press RECEIVER.
2 Use the display DIMMER button on
the remote control to alternate
between the different levels of
brightness for the display.
Four levels of brightness ranging from very dim to very
bright can be selected. Each press changes the
brightness of the display. When cycling through the
options, the default brightness can also be selected.
It is a feature of this unit that the fluorescent dis-
play will be brighter for a few seconds after you
choose a function (like DVD/LD, CD, etc.) and then
get softer. This will still happen when you adjust
the brightness but the new setting will be the one
the display softens to. memo
OFF
S0URCE TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD TV/SAT TV CONT VCR1/
DVR
VCR2 VIDEO CD MULTI OPERATION
DIMMER
MD/ TAPE2 CD-R/ TAPE1 TUNER RECEIVER
1 2
LOUDNESS TONE
3 4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+ 10 DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
AUDIO
EXIT
RETURN
ENTER
SETUP
2
1