Using other functions, Recording from audio/video components, Exper t basic – Pioneer VSX-D2011-G User Manual
Page 73: Functions that can be recorded
Using Other Functions
EXPER
T
BASIC
73
En
Recording from Audio/Video Components
The following explanations show you how make a recording from one component to another connected to this receiver.
Note that an analog recorder (such as a VCR) cannot record from a source that is connected using only a digital
connection. Likewise, a digital recorder (such as a CD-R) cannot record digitally from a component that is connected using
only analog connections. In both of these cases, make sure that the digital component also has analog connections to the
receiver, and that the SIGNAL SELECT is set to ANALOG.
When recording from one digital component to another, bear in mind that the digital signal output from this receiver
mirrors the input from the source. So if the input is, say, Dolby Digital, the output will also be Dolby Digital. Before
recording, make sure that the recorder is compatible with the source digital audio format.
See page 20 for more on analog audio connections and pages 22–23 for digital audio connections.
• The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS,
ACOUSTIC EQ and surround effects have no effect on the recorded signal, except in PHONO. Thus
when recording in PHONO function DIRECT is best used.
• In some cases, digital recordings have copy guard protections and making a digital copy is not pos-
sible. In this case you can only copy them in an analog manner.
• Some video recordings are copy-protected; these sources cannot be recorded.
• When recording video, the source must be connected to the receiver using the same type of video
cord (composite, or S video) as you used to connect the recorder to the receiver.
1 Select the source component. Set
SIGNAL SELECT according to the
source component's signal (ANALOG
or DIGITAL).
2 Start recording (tape deck, CD
recorder, VCR, etc.)
3 Playback the source to be recorded.
memo
Functions that can be recorded
OFF
S0URCE
TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD
TV/SAT
TV CONT
VCR1/
DVR
VCR2
VIDEO
CD
MULTI
OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1
TUNER
RECEIVER
1
2
LOUDNESS
TONE
3
4
DNR
5
SIGNAL SEL
VIDEO SEL
HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+
10
DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT
TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
SETUP
1
1