Pioneer VSX-D2011-G - Manual (Page 72)

Remote Control of Other Components
72
En
Setting up the DIRECT FUNCTION
The direct function will not be necessary for most users. It is designed in case you have an external video
source connected to your TV (a video source that is not going through the VSX-D2011). For this explanation we'll
call this the external video deck. You'd like to control external video deck with this unit's remote control so
you've assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in
VCR 2 mode you'll get no picture on your TV because the external video deck signal is not going through the
VSX-D2011. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press
VCR 2 function button you can control the external video deck with the remote but the receiver does not go into
VCR 2 mode.
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 Use the
5∞ buttons to select
DIRCTFNC and press ENTER.
SELECT FUNCTION will flash in the remote control
display.
3 Press the MULTI CONTROL button of
the component whose direct
function you want to turn on or off.
DIRECTFUNC appears on the remote control display.
4 Use the
5∞ buttons to select ON,
OFF, or EXIT and press ENTER.
ON: The direct function is on.
OFF: The direct function is off.
EXIT: Leaves the DIRECT FUNCTION settings and
returns you to the REMOTE SETUP menu.
After you press ENTER, if you chose one of the first
two settings, COMPLETE will appear in the display.
5 Repeat steps 2–4 to set the direct
function for as many components as
you want.
6 Press the REMOTE SETUP button to
return to the previous mode.
memo
OFF
S0URCE
Î
TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD TV/SAT TV CONT VCR1/ DVR
VCR2 VIDEO CD MULTI
OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1 TUNER RECEIVER
1 2
LOUDNESS TONE
3 4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+ 10 DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
REMOTE
SETUP
MPX
AUDIO
EXIT
RETURN
ENTER
¶
TUNING –
STATION
MODE
SURROUND
–
CHANNEL –
1
4
TEXT ON RF ATT DISP MODE
TUNING +
+
CHANNEL +
¡
STATION
¢
8
3
7
SUB TITLE
BAND
TEXT OFF CLASS
TV INPUT
TV CONTROL
TV CH
TV VOL VOLUME
INPUT
MIDNIGHT
MULTI CH
INPUT
STEREO/
DIRECT
MOVIE MUSIC
ENTER
MUTE
SB CH MODE
ACOUSTIC
EQ
SETUP
3
2,4
1,6
• To exit from the remote control
setup mode at any time, press
REMOTE SETUP.
• The default setting for all DIRECT
FUNCTIONs is ON.