Paxar 9430R - Manual (Page 30)

3-8 Configuring the Printer
Setting the Communication Parameters
Use the eight DIP switches to set the RS232 communication, IrDA, and
optional RF values. Gently use a plastic-tipped object to set the DIP
switches. Do not use any metal object!
To activate the DIP switches, turn the printer off and then back on. The
following table describes how to set the DIP switches.
1 2 3 4 5 6 7* 8
Communication
Interface
RS232 OFF
IrDA ON
Baud Rate
38400 OFF OFF
19200 OFF ON
9600 ON OFF
2400 ON ON
Parity
None OFF OFF
Odd ON OFF
Even ON ON
Hardware
Reset
Enable Reset ON
Disable Reset OFF
Printer Power
Continuous
Power On** ON
Auto Power Off OFF
* Switch 7 is not used.
** The printer stays on all the time – pressing the power ( P) button has
no effect.