Paxar 9430R - Manual (Page 44)

B-2 Command Summary
P r i n t i n g G r a p h i c s
Command String Printer Action
ESC-'J'-<num> Performs a line feed.
ESC-'P#' Selects online mode, characters are printed
when received.
ESC-'P$' Selects buffer mode, characters are printed
on receipt of an EOT character.
ESC-'V'-<lines1>-<lines2>-
#data#
Prints a line from a data stream graphic.
ESC-'v'-<height>-<width>-
<counter>-(data)
Specifies a line of a compressed graphic
Command
ESC-'DL' Performs step 1 of entering flash memory
graphic download mode.
ESC-'LG0' Performs step 2 of entering flash memory
graphic download mode.
ESC-'LG'-FF hex
Saves a flash memory graphic.
ESC-'Lg0' Prints the stored flash memory graphic.
S u p p l y C o n t r o l C o m m a n d s
Command String Printer Action
ESC-'QJ'-<lines> Moves the supply backward in .125mm
increments, looking for a black mark.
ESC-'QQ'-<lines>
Specifies the number of lines to continue
printing after failing to find a black mark.
ESC-'QF'-<max>
Moves the supply forward in .25mm
increments, looking for a black mark.
ESC-'QB'-<max> Moves the supply backward in .25mm
increments, looking for a black mark.