Paxar 9430R - Manual (Page 45)

Command Summary B-3
F o n t M o d i f i c a t i o n
Command String Printer Action
ESC-'DAO' Selects characters from the ASCII
character set.
ESC-'DX'-<charfont>
Selects extended characters from the PC
Line-Draw or International character sets.
ESC-'D'-<font>-<code>-
<matrix>
Loads a character at a particular position.
C o n f i g u r i n g t h e P r i n t e r
Command String Printer Action
ESC-'P^' Prints the battery voltage.
ESC-'P'-<value> Sets the power mode (when <value> is
hex).
Sets the print contrast (when <value> is
decimal).
ESC-'Mnn0'-cr
Sets the power down timer to nn seconds
(000 = disable timer).
ESC-'C'
Resets auto power down to 20 seconds.
ESC-'P!'
Requests the printer’s battery voltage.
ESC-'P(' Queries the printer firmware version.
ESC-'P)' Queries the printer hardware model.
U s i n g t h e M a g n e t i c C a r d R e a d e r
Command String Printer Action
ESC-'M'-#timer#-<tracks>-
CR
Prepares the reader for a card swipe.