Philips HTS3377W/12 - Manual (Page 11)

11
Option 2: Connect to the HDMI jack
1
Connect a HDMI cable (not supplied)
to the HDMI OUT jack on this Home
Theatre System and the HDMI input jack
on the TV.
Note
If your device supports HDMI CEC, you can •
control compliant devices with a single remote
control. (see ‘Get started’ > ‘Use Philips
EasyLink’).
Tip
If the TV has a DVI connection only, connect •
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
You can optimise the video output. (see •
‘Adjust settings’ > ‘Video setup’ > [HDMI
Setup] ).
This type of connection provides the best •
picture quality.
HDMI OUT
HDMI IN
Connect video cables
Connect this Home Theatre System to a TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the SCART jack •
Option 2: Connect to the HDMI jack (for •
a HDMI, DVI or HDCP-compliant TV).
Option 3: Connect to the video (CVBS)
•
jack (for a standard TV).
Note
You must connect this Home Theatre System •
directly to a TV.
Option 1: Connect to the SCART jack
1
Connect a scart cable to the SCART TO
TV jack on this Home Theatre System
and the SCART input jack on the TV.
Note
Scart connection allows TV’s audio output •
through the speakers. Press AUDIO SOURCE
repeatedly until ‘SCART IN’ is displayed on the
display panel.
This type of connection provides good picture •
quality.
SCART TO TV
SCART
English
EN