Philips HTS3377W/12 - Manual (Page 20)

20
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
Once complete, the audio input »
mapping menu is displayed.
For example, if the TV audio is
connected to the AUX jack on this
Home Theatre System, select [Aux]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theatre System that is used to connect to
other HDMI devices (e.g. AUX, SCART
IN), then press .
7
Select the correct connected device, then
press OK .
Repeat steps 5–7 to map other »
connected devices.
8
Press SETUP to exit the menu.
Aux
Optical In
Coaxial In
Audio Input Mapping
Scart In [TV]
other (Non-HDMI)
[DVD 3400]
System audio control
When you connect your product to HDMI
CEC-compliant devices, your product can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your product.
You can use the remote control from the
connected device to adjust the volume.
Audio Input Mapping
When you map the audio input correctly, this
Home Theatre System switches to the audio
from the played device automatically.
Map the devices to the audio inputs
Note
Before you start, ensure that the audio output •
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
1
Press DISC .
2
Press SETUP .
»
[General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
OSD Language
Sleep Timer
Screen Saver
Disc Lock
Display Dim
General Setup
DivX(R) VOD Code
EasyLink
One Touch Standby
System Audio Control
Audio Input Mapping
One Touch Play
EasyLink Setup
EN