Use philips easylink – Philips HTS3377W/12 User Manual

Page 19

Advertising
background image

19

Use Philips EasyLink

Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.

Note

Philips does not guarantee 100%

interoperability with all HDMI CEC devices.

1

Turn on the HDMI CEC operations on

the TV and other connected devices. See
TVs/devices manual for details.

2

You can now enjoy the following Philips

EasyLink controls.

EasyLink
You can turn off or turn on all EasyLink
features.
One-touch play
When you connect your product to devices
that support one-touch play, you can control
your product and the devices with one
remote control. For example, when you
press Play on your DVD remote control, your
TV automatically switches to the correct
channel to show the DVD content.
To enable One-touch play, a video disc must
be placed in the disc compartment before
operation.
One-touch standby
When you connect your product to devices
that support one-touch standby, you can use
your product remote control to switch your
product and all connected HDMI devices to
standby mode. You can perform one-touch
standby using the remote control from any of
the connected HDMI devices.

2

Press

to change the volume level,

then press OK .

The test tone is emitted from the

»

speaker.

Repeat the above setting for other

speakers until all the speakers’
output level sounds equally balanced.
To exit the menu, press

SETUP .

To set the output delay time (centre and rear
speakers only)

1

Select

[Speakers Delay] in the menu,

then press .

2

Press

to set the delay time, then press

OK .

Repeat the above setting for other

speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press

SETUP .

Tip

Set a longer delay time if the centre speaker or

rear speaker is closer to the listening position

than the front speaker.

Allow 1 ms setting for every 1 foot distance

between the speaker and the listening position.

Speakers Volume Setup

Front Left

Front Right

Center

Subwoofer

Rear Left

Rear Right

0dB

0dB

0dB

0dB

0dB

0dB

Speakers Distance Setup

Center

Rear Left

Rear Right

0MS

0MS

0MS

English

EN

Advertising
This manual is related to the following products: