Philips HTS3377W/12 - Manual (Page 14)

14
Tip
For better FM stereo reception, connect to an •
external FM antenna.
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theatre System to enjoy audio play with
multi-channel surround capabilities.
Connect audio to TV
(also used for EasyLink control)
1
Connect the audio cables (not supplied)
to the AUDIO IN-AUX jacks on the
Home Theatre System and the AUDIO
output jacks on the TV.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘AUX’ is displayed on the
display panel.
AUDIO OUT
AUX
AUDIO IN
Connect rear speakers to
wireless receiver
For the rear speakers of HTS3377W,
HTS3376W only
1
Connect the rear left and right speakers
to the matching jacks at the bottom of
the wireless receiver.
Connect radio antenna
1
Connect the FM antenna to the FM75
jack on this Home Theatre System
(for some models, this cable is already
connected).
2
Extend the FM antenna and fi x its ends to
the wall.
FM (75 Ω)
ANTENNA
EN