Philips HTS3377W/12 - Manual (Page 16)

16
Note
This Home Theatre System can only play/view •
MP3, WMA, DivX (Ultra) or JPEG fi les that are
stored on such devices.
Press • USB to access the content and play the
fi les.
Connect power cord
Warning
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1
Connect the power cords from the
Home Theatre System, wireless receiver
and other devices to the power sockets
when all the required connections are
done.
The wireless indicator on the wireless »
receiver light up. (Only applicable for
HTS3377W, HTS3376W)
The product is ready to be set up for
»
use.
Note
For optimum wireless reception, ensure that •
the wireless receiver is not obstructed by any
objects.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the
display panel.
Connect portable media player
1
Connect a 3.5 mm stereo audio cable
(not supplied) to the MP3 LINK jack
on this Home Theatre System and the
phone jack on the portable media player
(such as MP3 player).
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the
display panel.
Connect USB device
1
Connect the USB device to USB jack
on this Home Theatre System.
MP3
EN