Pitney Bowes DM100i - Manual (Page 37)

3-7
3 • Running Mail
SV62214 Rev. A
10. Place the envelope up against the
registration wall of the sys tem and
slide it to the right until the sys tem
grasps it. The system prints the me-
ter stamp and ejects the envelope/
tape sheet.
9. If using the moistener, place flap
along moistener and move towards
the right.
Using Differential Weighing
DIFF. WEIGHING
Remove one mailpiece
TOTAL: xlb. x.xoz
11. The same screen from Step 7 appears.
Repeat steps 7 -10 for each item that needs postage.
12. When you have removed the last item from the scale, the "LAST
ITEM" screen displays.
LAST ITEM
◄Rate this item
◄Exit Diff. Weighing
◄Continue
Rate this item – select this option if you want to rate the last
piece removed. A ready to print postage screen displays.
Follow Steps 8-11 above. The Home screen displays when
you are done.
Exit Diff. Weighing – select this option if you want to exit this mode
without rating the last item. The Home screen displays.
Continue – select this option if you want to continue rating more
items with the same rate. A "Place mail on scale" screen dis-
plays. Follow Steps 7-11 above to continue.