Pitney Bowes DM100i - Manual (Page 80)

7-10
7 • System Options
SV62214 Rev. A
1. Press Options .
2. Press Page Down twice.
3. Select "LockCode/Passwords".
4. Select "Su per vi sor Password" If there is an existing supervisor
password, you are prompted to key in the 4-digit code.
Supervisor Options
◄Disable password
◄Change password
5. You then have a choice to either disable the password (if pres-
ent) or change (or establish) the password.
PASSWORDS
◄Meter Lock Code
◄Supervisor Password
A. To disable the password:
Select "Disable Password". At the "Supervisor Password has
been disabled" message, select "Continue".
B. To change or establish the password:
Select "Change password". At the prompt, type in a new
password (4 digits) and select "Continue". Re-enter the new
password again to confirm and select "Continue". At the
"Supervisor Password has been enabled" message, select
"Continue".
6. Press Clear (back arrow key) to return to Options menu.
Setting/Disabling the Supervisor Password
A Supervisor password can be used to prevent unauthorized account
changes within the Departmental Accounting feature. If you establish
a Supervisor password, a user will need to enter this password to
add, edit, or delete Departmental Accounts; and for clearing Depart-
mental Account totals.
i NOTE: You need to set up a Supervisor password also if you
want to enable Account passwords (see Chapter 8, Departmen-
tal Accounting)
.