Palm PDA CentroTM Smart Device - Manual (Page 230)

Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
U S I N G E X P A N S I O N C A R D S 230
11
CH
AP
T
E
R
facing you. The notch on the card should
be in the lower corner.
4 Insert the card into the expansion card
slot until you feel it lock into place.
5 Close the expansion slot door.
6 Replace the battery door.
Removing an expansion card
1 Remove the battery door.
2 Open the expansion slot door.
3 Press the card into the expansion slot to
release it from the expansion slot.
4 After you feel the expansion card slot
eject the card, remove the card
from the slot.
5 Close the expansion slot door.
6 Replace the battery door.
Opening applications on an expansion
card
After you insert an expansion card into the
expansion card slot, you can open any of
the applications stored on the expansion
card.
1 Insert the expansion card into the
expansion card slot. The Card category
of Applications View automatically
appears.
TIP The expansion card slot has a push-push
mechanism: push in gently to insert a card;
push in gently to remove it.
TIP If the Ringer switch is set to Sound On,
you hear a confirmation tone when you insert
or remove an expansion card.