Palm PDA CentroTM Smart Device - Manual (Page 262)

C O M M O N Q U E S T I O N S
R E P L A C I N G T H E B A T T E R Y 262
13
CH
AP
T
E
R
battery that is recommended or sold by
Palm and is compatible with the Centro.
CAUTION Failure to use the proper battery
may result in a risk of personal injury or
product damage, and it voids your Centro
warranty.
1 Press Power/End to turn off the
screen.
2 Press the Battery door near the top
where the door and camera sections
meet and slide it downward to remove
it from your Centro.
3 Place a finger in the notch next to the
battery, and lift up the old battery at a
45-degree angle to remove it from the
compartment.
4 Align the metal contacts on the new
battery with the contacts inside the
battery compartment, insert the new
battery into the compartment at a
45-degree angle, and then press it into
place.
IMPORTANT Use the battery that came
with your Centro. Do not use a battery
from another Centro model in your Centro.
Similarly, do not use the Centro battery in
another Centro model. Using a battery that
is designed for another Centro model can
damage your Centro.
5 Slide the battery door onto the back of
the Centro until it clicks into place.
Battery door
Battery contacts
Centro
contacts