Philips HTS5700R - Manual (Page 16)

English
16
8239 300 38591
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 7).
Selecting surround sound
● In DISC COAX or DISC OPTI mode, if
the audio signal received is Dolby Digital
or DTS, pressing SURROUND button
will cyclically go through :
DOLBY DIGITAL / DTS ™ STEREO
● Otherwise, pressing SURROUND
button will cyclically go through :
MOVIE ™ MUSIC ™ PRO LOGIC
™ STEREO
Helpful Hints:
– The available Surround outputs include:
Dolby Digital, DTS (Digital Theatre Systems)
Surround, Dolby Pro Logic II and Dolby Pro
Logic.
– MOVIE and MUSIC are Dolby Pro Logic II
surround sound.
– The surround feature is not available in
DISC 6CH mode.
– The centre and rear speakers operate only
in multichannel surround mode.
– The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
Selecting digital sound effects
Select a preset digital sound effect that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
● Press SOUND on the remote to select
the available sound effect.
In Dolby Digital, DTS, PRO LOGIC or
PRO LOGIC II (MOVIE) surround mode,
you can select :
CONCERT, ACTION,DRAMA, or
DIGIT
Adjusting the Bass/Treble
level
The BASS (low tone) and TREBLE (high
tone) features enable you to define the
sound-processor settings.
1
Press BASS or TREBLE.
2
Within two seconds, use the VOLUME
control to adjust the Bass or Treble level
(-10dB ~ 10dB, default setting - 0dB).
➜ If the volume control is not used
within two seconds, it will resume its
normal volume control function.
➜ If headphone is connected, it will
disable the bass/treble controls.
Sound Controls
SCI-FI
(default setting)
In PRO LOGIC II (MUSIC) surround
mode or in Tuner mode, you can select :
CLASSIC, ROCK, JAZZ, or AL
(default setting).
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.