Philips HTS5700R - Manual (Page 76)

E
n
g
lis
h
54 55
DVD System Menu Options
(continued)
Video Output Format
The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
A In ‘System Menu-General’, use  keys
to select { Video Output Format } and
press OK.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
B Use  keys to select a setting and
press OK to confirm.
Helpful Hint:
– If a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.
Restore Factory settings
This will restore all the settings of this
DVD Recorder, except for the PIN code.
A In ‘System Menu-General’, use  keys
to select { Restore Factory Settings }
and press OK.
 A warning message will appear.
B Select
OK
in the menu to proceed or
CANCEL
to abort, then press OK to
confirm.
TIPS: The underlined option is the factory default setting.
Press  to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
1_dvdr3355_eu_eng_15891.indd 54 2005-04-27 2:37:26 PM