Philips HTS5700R - Manual (Page 37)

E
n
g
li
sh
15
Optional Connections
A
B
C
Antenna/ cable
TV signals
Connecting to a Cable Box or
Satellite Receiver
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
refer to “Connecting the antenna cables”
on page 12 for the complete connection
to your TV.
Option 2
If your Cable Box/Satellite Receiver
has Scart output socket
A Remain with the existing antenna
connection from the Cable Box/Satellite
Receiver to your TV.
B Use the scart cable to connect EXT1
TO TV-I/O socket on the DVD
recorder to the corresponding SCART
input socket on the TV.
C Use another scart cable to connect the
EXT2 AUX-I/O socket on the DVD
recorder to the Scart output socket (or
labelled as TV OUT or TO TV) on the
Cable Box/Satellite Receiver.
To start playback, select the TV channel
directly on the Cable Box/Satellite
Receiver. The DVD recorder will
automatically send the video/audio signals
from EXT2 AUX-I/O socket to
EXT1 TO TV-I/O socket. You will then
see the picture from the additional device
on your TV, even if the DVD recorder is
turned off.
RF S-VIDEO
OUT IN
AUDIO
R L
VIDEO
TO TV
AU D IO O U T S-V ID E O IN
V ID E O IN
TV
Back of a Cable Box
or Satellite Receiver
(Example only)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
1_dvdr3355_eu_eng_15891.indd 15 2005-04-27 2:35:43 PM